Potato starch producing equipment

Potato starch producing equipment

In the world , starch is mainly produced from corn , potato ,cassava or wheat. Potato starch is the starch extracted from potatoes by potato starch producing equipment .

The potato starch producing equipment can produce high quality potato starch from fresh potatoes automatically . 

The potato starch producing equipment production process as below : 

1. Raw material receiving unit in potato starch producing equipment: 

The potato is carried besides the storage pool after weighing. Firstly, it goes through the vibration sieve for removing the stones and sand. Then the pre-cleaned potato falls on the belt conveyor and enters into the storage pool, and the rubbish will be carried away by truck.

2. De-stone and washing unit in potato starch producing equipment : 

Potato is transferred into the screw destone machine to be cleaned by water flow. The small sand and stone go through the rotary screen then meet with bigger size stone which was stopped and sent back to the entrance of de-stone machine. Most of sand and stone are removed out of de-stone machine. The potato then goes into rotary cleaning machine for further removing of dirt and broken chips. Cleaned potato falls on a checking conveying belt equipped with nozzles for washing the surface of potato. Workers can manually take out the rotten potatos, wooden and plastic items. At the end of belt, the iron remover is installed for removing metal impurities. Then the potato is sent by bulk elevator into temporary storage in which it can stay 2 hours.

3. Milling unit in potato starch producing equipment : 

The milling unit is the most important step for extracting potato starch. The feeding screw combined at bottom of the storage tank pumped the clean potato into milling machine. Highly-efficient milling machine will release the starch in potato at most.

4. De-sanding cyclone unit in potato starch producing equipment :

After milling, the starch milk is transferred to de-sanding cyclone by fiber pump. The hydro-cyclone divide the milk into two parts: the light part  which contains the mixture of starch and residue will go out from top of the cyclone, and the heavy part which contains the sand will be discharged out of the system.

5. Centrifugal extracting unit in potato starch producing equipment : 
The mixture is transferred to the 3 stage centrifugal sieves, each sieve works with a fiber pump and a defoam pump. The mixture enters into each sieve to separate residue and starch. After 3 stages continuous washing and separation, the filtrate is sent to concentration and refining unit, and the residue is sent to the residue de-watering unit.

6. Potato residue de-watering unit in potato starch producing equipment : 

The potato residue will be pumped to the centrifugal sieve for de-watering, the centrifugal sieve works like the extraction sieve. Then the screw conveyor discharges the residue out of the process, and the water will go back to the process water system.

7. Concentration and refining unit in potato starch producing equipment :

The starch milk from centrifugal sieve goes into the 16 stages of refining hydro-cyclone, and fresh water comes into the cyclone from the end of system. Firstly, starch milk is pumped into 3 stages of concentration unit to remove the water, then the condensed starch milk enter the next 13 stages of washing unit, and the overflow enters into another 2 stages of recycle unit to recycle starch. Most of the effluent with fiber is discharged out of the process, and a little part goes back to the process water system. Finally, the condensed starch slurry is pumped into the starch slurry storage tank.

8. Vacuum de-watering unit in potato starch producing equipment : 

The starch slurry is pumped into inlet tank of vacuum de-watering machine. Then the vacuum rotary drum will adsorb the starch on the drum surface and the filtrate is transferred out of the system by filtrate pump. The filter cake on the drum will be peeled off by peeler and then transferred to the air dryer.

9. Air drying unit in potato starch producing equipment : 

After de-watering process, the air dryer will dry the starch to the required moisture of the commercial starch by hot air . Then dry starch goes into the starch sieve to get the required size starch and pack into bags .

More Information about our potato starch producing equipment , please contact
Phone: +86 371 56771822
Email : sales@doingmachinery.com
Website: www.starchprojectsolution.com

Title :
Name:
Email:*
TEL :
Country:
Inquiry *
Please input your inquirys

Potato starch extraction equipment

Potato starch extraction equipment

In the world , starch is mainly produced from corn , potato ,cassava or wheat. Potato starch is the starch extracted from potatoes by potato starch extraction equipment .

The potato starch extraction equipment can produce high quality potato starch from fresh potatoes automatically . 

The potato starch extraction equipment production process as below : 

1. Raw material receiving unit in potato starch extraction equipment: 

The potato is carried besides the storage pool after weighing. Firstly, it goes through the vibration sieve for removing the stones and sand. Then the pre-cleaned potato falls on the belt conveyor and enters into the storage pool, and the rubbish will be carried away by truck.

2. De-stone and washing unit in potato starch extraction equipment : 

Potato is transferred into the screw destone machine to be cleaned by water flow. The small sand and stone go through the rotary screen then meet with bigger size stone which was stopped and sent back to the entrance of de-stone machine. Most of sand and stone are removed out of de-stone machine. The potato then goes into rotary cleaning machine for further removing of dirt and broken chips. Cleaned potato falls on a checking conveying belt equipped with nozzles for washing the surface of potato. Workers can manually take out the rotten potatos, wooden and plastic items. At the end of belt, the iron remover is installed for removing metal impurities. Then the potato is sent by bulk elevator into temporary storage in which it can stay 2 hours.

3. Milling unit in potato starch extraction equipment : 

The milling unit is the most important step for extracting potato starch. The feeding screw combined at bottom of the storage tank pumped the clean potato into milling machine. Highly-efficient milling machine will release the starch in potato at most.

4. De-sanding cyclone unit in potato starch extraction equipment :

After milling, the starch milk is transferred to de-sanding cyclone by fiber pump. The hydro-cyclone divide the milk into two parts: the light part  which contains the mixture of starch and residue will go out from top of the cyclone, and the heavy part which contains the sand will be discharged out of the system.

5. Centrifugal extracting unit in potato starch extraction equipment : 
The mixture is transferred to the 3 stage centrifugal sieves, each sieve works with a fiber pump and a defoam pump. The mixture enters into each sieve to separate residue and starch. After 3 stages continuous washing and separation, the filtrate is sent to concentration and refining unit, and the residue is sent to the residue de-watering unit.

6. Potato residue de-watering unit in potato starch extraction equipment : 

The potato residue will be pumped to the centrifugal sieve for de-watering, the centrifugal sieve works like the extraction sieve. Then the screw conveyor discharges the residue out of the process, and the water will go back to the process water system.

7. Concentration and refining unit in potato starch extraction equipment :

The starch milk from centrifugal sieve goes into the 16 stages of refining hydro-cyclone, and fresh water comes into the cyclone from the end of system. Firstly, starch milk is pumped into 3 stages of concentration unit to remove the water, then the condensed starch milk enter the next 13 stages of washing unit, and the overflow enters into another 2 stages of recycle unit to recycle starch. Most of the effluent with fiber is discharged out of the process, and a little part goes back to the process water system. Finally, the condensed starch slurry is pumped into the starch slurry storage tank.

8. Vacuum de-watering unit in potato starch extraction equipment : 

The starch slurry is pumped into inlet tank of vacuum de-watering machine. Then the vacuum rotary drum will adsorb the starch on the drum surface and the filtrate is transferred out of the system by filtrate pump. The filter cake on the drum will be peeled off by peeler and then transferred to the air dryer.

9. Air drying unit in potato starch extraction equipment : 

After de-watering process, the air dryer will dry the starch to the required moisture of the commercial starch by hot air . Then dry starch goes into the starch sieve to get the required size starch and pack into bags .

More Information about our potato starch extraction equipment , please contact
Phone: +86 371 56771822
Email : sales@doingmachinery.com
Website: www.starchprojectsolution.com

Title :
Name:
Email:*
TEL :
Country:
Inquiry *
Please input your inquirys

Potato starch making equipment

Potato starch making equipment

In the world , starch is mainly produced from corn , potato ,cassava or wheat. Potato starch is the starch extracted from potatoes by potato starch making equipment .

The potato starch making equipment can produce potato starch from potato automatically . 

The potato starch making equipment production process as below : 

1. Raw material receiving unit in potato starch making equipment: 

The potato is carried besides the storage pool after weighing. Firstly, it goes through the vibration sieve for removing the stones and sand. Then the pre-cleaned potato falls on the belt conveyor and enters into the storage pool, and the rubbish will be carried away by truck.

2. De-stone and washing unit in potato starch making equipment : 

Potato is transferred into the screw destone machine to be cleaned by water flow. The small sand and stone go through the rotary screen then meet with bigger size stone which was stopped and sent back to the entrance of de-stone machine. Most of sand and stone are removed out of de-stone machine. The potato then goes into rotary cleaning machine for further removing of dirt and broken chips. Cleaned potato falls on a checking conveying belt equipped with nozzles for washing the surface of potato. Workers can manually take out the rotten potatos, wooden and plastic items. At the end of belt, the iron remover is installed for removing metal impurities. Then the potato is sent by bulk elevator into temporary storage in which it can stay 2 hours.

3. Milling unit in potato starch making equipment : 

The milling unit is the most important step for extracting potato starch. The feeding screw combined at bottom of the storage tank pumped the clean potato into milling machine. Highly-efficient milling machine will release the starch in potato at most.

4. De-sanding cyclone unit in potato starch making equipment :

After milling, the starch milk is transferred to de-sanding cyclone by fiber pump. The hydro-cyclone divide the milk into two parts: the light part  which contains the mixture of starch and residue will go out from top of the cyclone, and the heavy part which contains the sand will be discharged out of the system.

5. Centrifugal extracting unit in potato starch making equipment : 
The mixture is transferred to the 3 stage centrifugal sieves, each sieve works with a fiber pump and a defoam pump. The mixture enters into each sieve to separate residue and starch. After 3 stages continuous washing and separation, the filtrate is sent to concentration and refining unit, and the residue is sent to the residue de-watering unit.

6. Potato residue de-watering unit in potato starch making equipment : 

The potato residue will be pumped to the centrifugal sieve for de-watering, the centrifugal sieve works like the extraction sieve. Then the screw conveyor discharges the residue out of the process, and the water will go back to the process water system.

7. Concentration and refining unit in potato starch making equipment :

The starch milk from centrifugal sieve goes into the 16 stages of refining hydro-cyclone, and fresh water comes into the cyclone from the end of system. Firstly, starch milk is pumped into 3 stages of concentration unit to remove the water, then the condensed starch milk enter the next 13 stages of washing unit, and the overflow enters into another 2 stages of recycle unit to recycle starch. Most of the effluent with fiber is discharged out of the process, and a little part goes back to the process water system. Finally, the condensed starch slurry is pumped into the starch slurry storage tank.

8. Vacuum de-watering unit in potato starch making equipment : 

The starch slurry is pumped into inlet tank of vacuum de-watering machine. Then the vacuum rotary drum will adsorb the starch on the drum surface and the filtrate is transferred out of the system by filtrate pump. The filter cake on the drum will be peeled off by peeler and then transferred to the air dryer.

9. Air drying unit in potato starch making equipment : 

After de-watering process, the air dryer will dry the starch to the required moisture of the commercial starch by hot air . Then dry starch goes into the starch sieve to get the required size starch and pack into bags .

More Information about our potato starch making equipment , please contact
Phone: +86 371 56771822
Email : sales@doingmachinery.com
Website: www.starchprojectsolution.com

Title :
Name:
Email:*
TEL :
Country:
Inquiry *
Please input your inquirys

Potato starch processing equipment

Potato starch processing equipment

In the world , starch is mainly produced from corn , potato ,cassava or wheat. Potato starch is the starch extracted from potatoes by potato starch processing equipment .

The potato starch processing equipment can produce potato starch from potato automatically . 

The potato starch processing equipment production process as below : 

1. Raw material receiving unit in potato starch processing equipment: 

The potato is carried besides the storage pool after weighing. Firstly, it goes through the vibration sieve for removing the stones and sand. Then the pre-cleaned potato falls on the belt conveyor and enters into the storage pool, and the rubbish will be carried away by truck.

2. De-stone and washing unit in potato starch processing equipment : 

Potato is transferred into the screw destone machine to be cleaned by water flow. The small sand and stone go through the rotary screen then meet with bigger size stone which was stopped and sent back to the entrance of de-stone machine. Most of sand and stone are removed out of de-stone machine. The potato then goes into rotary cleaning machine for further removing of dirt and broken chips. Cleaned potato falls on a checking conveying belt equipped with nozzles for washing the surface of potato. Workers can manually take out the rotten potatos, wooden and plastic items. At the end of belt, the iron remover is installed for removing metal impurities. Then the potato is sent by bulk elevator into temporary storage in which it can stay 2 hours.

3. Milling unit in potato starch processing equipment : 

The milling unit is the most important step for extracting potato starch. The feeding screw combined at bottom of the storage tank pumped the clean potato into milling machine. Highly-efficient milling machine will release the starch in potato at most.

4. De-sanding cyclone unit in potato starch processing equipment :

After milling, the starch milk is transferred to de-sanding cyclone by fiber pump. The hydro-cyclone divide the milk into two parts: the light part  which contains the mixture of starch and residue will go out from top of the cyclone, and the heavy part which contains the sand will be discharged out of the system.

5. Centrifugal extracting unit in potato starch processing equipment : 
The mixture is transferred to the 3 stage centrifugal sieves, each sieve works with a fiber pump and a defoam pump. The mixture enters into each sieve to separate residue and starch. After 3 stages continuous washing and separation, the filtrate is sent to concentration and refining unit, and the residue is sent to the residue de-watering unit.

6. Potato residue de-watering unit in potato starch processing equipment : 

The potato residue will be pumped to the centrifugal sieve for de-watering, the centrifugal sieve works like the extraction sieve. Then the screw conveyor discharges the residue out of the process, and the water will go back to the process water system.

7. Concentration and refining unit in potato starch processing equipment :

The starch milk from centrifugal sieve goes into the 16 stages of refining hydro-cyclone, and fresh water comes into the cyclone from the end of system. Firstly, starch milk is pumped into 3 stages of concentration unit to remove the water, then the condensed starch milk enter the next 13 stages of washing unit, and the overflow enters into another 2 stages of recycle unit to recycle starch. Most of the effluent with fiber is discharged out of the process, and a little part goes back to the process water system. Finally, the condensed starch slurry is pumped into the starch slurry storage tank.

8. Vacuum de-watering unit in potato starch processing equipment : 

The starch slurry is pumped into inlet tank of vacuum de-watering machine. Then the vacuum rotary drum will adsorb the starch on the drum surface and the filtrate is transferred out of the system by filtrate pump. The filter cake on the drum will be peeled off by peeler and then transferred to the air dryer.

9. Air drying unit in potato starch processing equipment : 

After de-watering process, the air dryer will dry the starch to the required moisture of the commercial starch by hot air . Then dry starch goes into the starch sieve to get the required size starch and pack into bags .

More Information about our potato starch processing equipment , please contact
Phone: +86 371 56771822
Email : sales@doingmachinery.com
Website: www.starchprojectsolution.com

Title :
Name:
Email:*
TEL :
Country:
Inquiry *
Please input your inquirys

Potato starch production equipment

Potato starch production equipment

In the world , starch is mainly produced from corn , potato ,cassava or wheat. Potato starch is the starch extracted from potatoes by potato starch production equipment .

The potato starch production equipment can produce potato starch from potato automatically . 

The potato starch production equipment production process as below : 

1. Raw material receiving unit in potato starch production equipment: 

The potato is carried besides the storage pool after weighing. Firstly, it goes through the vibration sieve for removing the stones and sand. Then the pre-cleaned potato falls on the belt conveyor and enters into the storage pool, and the rubbish will be carried away by truck.

2. De-stone and washing unit in potato starch production equipment : 

Potato is transferred into the screw destone machine to be cleaned by water flow. The small sand and stone go through the rotary screen then meet with bigger size stone which was stopped and sent back to the entrance of de-stone machine. Most of sand and stone are removed out of de-stone machine. The potato then goes into rotary cleaning machine for further removing of dirt and broken chips. Cleaned potato falls on a checking conveying belt equipped with nozzles for washing the surface of potato. Workers can manually take out the rotten potatos, wooden and plastic items. At the end of belt, the iron remover is installed for removing metal impurities. Then the potato is sent by bulk elevator into temporary storage in which it can stay 2 hours.

3. Milling unit in potato starch production equipment : 

The milling unit is the most important step for extracting potato starch. The feeding screw combined at bottom of the storage tank pumped the clean potato into milling machine. Highly-efficient milling machine will release the starch in potato at most.

4. De-sanding cyclone unit in potato starch production equipment :

After milling, the starch milk is transferred to de-sanding cyclone by fiber pump. The hydro-cyclone divide the milk into two parts: the light part  which contains the mixture of starch and residue will go out from top of the cyclone, and the heavy part which contains the sand will be discharged out of the system.

5. Centrifugal extracting unit in potato starch production equipment : 
The mixture is transferred to the 3 stage centrifugal sieves, each sieve works with a fiber pump and a defoam pump. The mixture enters into each sieve to separate residue and starch. After 3 stages continuous washing and separation, the filtrate is sent to concentration and refining unit, and the residue is sent to the residue de-watering unit.

6. Potato residue de-watering unit in potato starch production equipment : 

The potato residue will be pumped to the centrifugal sieve for de-watering, the centrifugal sieve works like the extraction sieve. Then the screw conveyor discharges the residue out of the process, and the water will go back to the process water system.

7. Concentration and refining unit in potato starch production equipment :

The starch milk from centrifugal sieve goes into the 16 stages of refining hydro-cyclone, and fresh water comes into the cyclone from the end of system. Firstly, starch milk is pumped into 3 stages of concentration unit to remove the water, then the condensed starch milk enter the next 13 stages of washing unit, and the overflow enters into another 2 stages of recycle unit to recycle starch. Most of the effluent with fiber is discharged out of the process, and a little part goes back to the process water system. Finally, the condensed starch slurry is pumped into the starch slurry storage tank.

8. Vacuum de-watering unit in potato starch production equipment : 

The starch slurry is pumped into inlet tank of vacuum de-watering machine. Then the vacuum rotary drum will adsorb the starch on the drum surface and the filtrate is transferred out of the system by filtrate pump. The filter cake on the drum will be peeled off by peeler and then transferred to the air dryer.

9. Air drying unit in potato starch production equipment : 

After de-watering process, the air dryer will dry the starch to the required moisture of the commercial starch by hot air . Then dry starch goes into the starch sieve to get the required size starch and pack into bags .

More Information about our potato starch production equipment , please contact
Phone: +86 371 56771822
Email : sales@doingmachinery.com
Website: www.starchprojectsolution.com

Title :
Name:
Email:*
TEL :
Country:
Inquiry *
Please input your inquirys

Potato starch manufacturing equipment

Potato starch manufacturing equipment

In the world , starch is mainly produced from corn , potato ,cassava or wheat. Potato starch is the starch extracted from potatoes by potato starch manufacturing equipment .

The potato starch manufacturing equipment can produce potato starch from potato automatically . 

The potato starch manufacturing equipment production process as below : 

1. Raw material receiving unit in potato starch manufacturing equipment: 

The potato is carried besides the storage pool after weighing. Firstly, it goes through the vibration sieve for removing the stones and sand. Then the pre-cleaned potato falls on the belt conveyor and enters into the storage pool, and the rubbish will be carried away by truck.

2. De-stone and washing unit in potato starch manufacturing equipment : 

Potato is transferred into the screw destone machine to be cleaned by water flow. The small sand and stone go through the rotary screen then meet with bigger size stone which was stopped and sent back to the entrance of de-stone machine. Most of sand and stone are removed out of de-stone machine. The potato then goes into rotary cleaning machine for further removing of dirt and broken chips. Cleaned potato falls on a checking conveying belt equipped with nozzles for washing the surface of potato. Workers can manually take out the rotten potatos, wooden and plastic items. At the end of belt, the iron remover is installed for removing metal impurities. Then the potato is sent by bulk elevator into temporary storage in which it can stay 2 hours.

3. Milling unit in potato starch manufacturing equipment : 

The milling unit is the most important step for extracting potato starch. The feeding screw combined at bottom of the storage tank pumped the clean potato into milling machine. Highly-efficient milling machine will release the starch in potato at most.

4. De-sanding cyclone unit in potato starch manufacturing equipment :

After milling, the starch milk is transferred to de-sanding cyclone by fiber pump. The hydro-cyclone divide the milk into two parts: the light part  which contains the mixture of starch and residue will go out from top of the cyclone, and the heavy part which contains the sand will be discharged out of the system.

5. Centrifugal extracting unit in potato starch manufacturing equipment : 
The mixture is transferred to the 3 stage centrifugal sieves, each sieve works with a fiber pump and a defoam pump. The mixture enters into each sieve to separate residue and starch. After 3 stages continuous washing and separation, the filtrate is sent to concentration and refining unit, and the residue is sent to the residue de-watering unit.

6. Potato residue de-watering unit in potato starch manufacturing equipment : 

The potato residue will be pumped to the centrifugal sieve for de-watering, the centrifugal sieve works like the extraction sieve. Then the screw conveyor discharges the residue out of the process, and the water will go back to the process water system.

7. Concentration and refining unit in potato starch manufacturing equipment :

The starch milk from centrifugal sieve goes into the 16 stages of refining hydro-cyclone, and fresh water comes into the cyclone from the end of system. Firstly, starch milk is pumped into 3 stages of concentration unit to remove the water, then the condensed starch milk enter the next 13 stages of washing unit, and the overflow enters into another 2 stages of recycle unit to recycle starch. Most of the effluent with fiber is discharged out of the process, and a little part goes back to the process water system. Finally, the condensed starch slurry is pumped into the starch slurry storage tank.

8. Vacuum de-watering unit in potato starch manufacturing equipment : 

The starch slurry is pumped into inlet tank of vacuum de-watering machine. Then the vacuum rotary drum will adsorb the starch on the drum surface and the filtrate is transferred out of the system by filtrate pump. The filter cake on the drum will be peeled off by peeler and then transferred to the air dryer.

9. Air drying unit in potato starch manufacturing equipment : 

After de-watering process, the air dryer will dry the starch to the required moisture of the commercial starch by hot air . Then dry starch goes into the starch sieve to get the required size starch and pack into bags .

More Information about our potato starch manufacturing equipment , please contact
Phone: +86 371 56771822
Email : sales@doingmachinery.com
Website: www.starchprojectsolution.com

Title :
Name:
Email:*
TEL :
Country:
Inquiry *
Please input your inquirys

Sweet potato starch manufacturing equipment

Sweet potato starch manufacturing equipment 

In the world , starch is mainly produced from corn ,potato ,cassava , sweet potato or wheat flour . Sweet potato starch is the starch extracted from sweet potatoes from sweet potato starch manufacturing equipment .

The sweet potato starch manufacturing equipment can produce sweet potato starch from sweet potato automatically . 

The sweet potato starch manufacturing equipment production process as below : 

1. Raw material receiving unit in sweet potato starch manufacturing equipment  : 

The sweet potato is carried to the storage yard after weighing. Firstly, it goes through the vibration sieve for removing the stones and sand. Then the pre-cleaned sweet potato falls on the belt conveyor and enters into the storage yard and the rubbish will be carried away by truck.

2. De-stone and washing unit in sweet potato starch manufacturing equipment   : 

Sweet potato is put into the hopper which connect with one screw washing conveyor. The small sand and stone will be sieved out.  The sweet potato will be transport by the washing conveyor to next washing de-stone machine . The washing de-stone machine will use the gravity to separate stone and sweet again to make sure No stone left with sweet potato for  milling .  Then the sweet potato will be washed again two times and transport to the milling unit. 

3. Milling unit in sweet potato starch manufacturing equipment  : 

The milling unit is the most important step for extracting potato starch. The feeding screw washing conveyor transport  the clean sweet potato into milling machine. Highly-efficient milling machine will release the starch in sweet potato at most and make sweet potato into sweet potato slurry.

4. Centrifugal starch extraction unit in sweet potato starch manufacturing equipment  : 
The mixture sweet potato slurry is pumped to the 3 stage centrifugal sieves, each sieve works with a fiber pump and a de-foam pump. The mixture enters into each sieve to separate residue and starch. After 3 stages continuous washing and separation, the filtrate is sent to concentration and refining unit, and the residue is sent to the residue de-watering unit.

5. De-sanding cyclone unit in sweet potato starch manufacturing equipment  :

After starch extraction , the  raw starch milk is pumped to de-sanding cyclone by  pump. The hydro-cyclone divide the milk into two parts: the light part  which contains the mixture of starch and residue will go out from top of the cyclone, and the heavy part which contains the sand will be discharged out of the system.

6. Sweet potato residue de-watering unit in sweet potato starch manufacturing equipment  : 

The sweet potato residue will be transferred to the centrifugal sieve for de-watering, the centrifugal sieve works like the extraction sieve. Then the screw conveyor discharges the residue out of the process, and the water will go back to the process water system.

7. Concentration and refining unit in sweet potato starch manufacturing equipment  :

The starch milk from centrifugal sieve goes into the 16 stages of refining hydro-cyclone, and fresh water comes into the cyclone from the end of system. Firstly, starch milk is pumped into 3 stages of concentration unit to remove the water, then the condensed starch milk enter the next 13 stages of washing unit, and the overflow enters into another 2 stages of recycle unit to recycle starch. Most of the effluent with fiber is discharged out of the process, and a little part goes back to the process water system. Finally, the condensed starch slurry is pumped into the starch slurry storage tank.

8. Vacuum de-watering unit in sweet potato starch manufacturing equipment  : 

The starch slurry is pumped into inlet tank of vacuum de-watering machine. Then the vacuum rotary drum will adsorb the starch on the drum surface and the filtrate is transferred out of the system by filtrate pump. The filter cake on the drum will be peeled off by peeler and then transferred to the air dryer.

9. Air drying unit in sweet potato starch manufacturing equipment  : 

After de-watering process, the air dryer will dry the starch to the required moisture of the commercial starch by hot air . Then dry starch goes into the starch sieve to get the required size starch and pack into bags .

More Information about our sweet potato starch manufacturing equipment  , please contact
Phone: +86 371 56771822
Email : sales@doingmachinery.com
Website: www.starchprojectsolution.com

Title :
Name:
Email:*
TEL :
Country:
Inquiry *
Please input your inquirys